Front grille logo for R1150

Front grille logo for R1150

Postby maesci » Mon Nov 21, 2005 9:19 pm

Hello everybody.
I'am Marco from Italy, and I own a '69 R16 Super - R1150.
My car's numbers: type R1150 - body 1050655 - equipment 102 - fabrication 399 598 - engine type 697-01
I finished the restoration of the body last year, but still I miss the Renault logo on the front grille. I found one on the internet, from a R16 club in the Netherlands (Renault spare parts code 08 57 637 400), but it does not fit on my car, as my car has two holes on the grille (see attached pic) and the logo I bought has only one pin on the rear.
I contacted the chief for Renault spare parts in Italy: of course they do not have any logo on stock, but he could read on an old spare parts catalogue that the correct number for the logo with 2 pins for my car should be the following: 77 00 550 199 - this should be the correct logo that matches with my "two holes" grille. The distance of the two holes is exactly 35 mm.
Can somebody on the forum help me? Thanks a lot!!!
My e-mail address is maesci@inwind.it
Attachments
Calandra con fori.jpg
Calandra con fori.jpg (187.68 KiB) Viewed 34556 times
maesci
 
Posts: 1
Joined: Mon Nov 21, 2005 4:24 pm

Postby r16magnus » Tue Nov 22, 2005 8:10 pm

Hello Marco!

Well the problem is not your logo, it is your grille piece :shock:
The grille you have is for a car newer than 1972 which should have the new logo (77 00 567 696).
Your car should have a grille with no holes at all as the logo is bolted between two grille bars.

What you need are the following pieces:
- logo holder (06 08 289 900)
- distance (06 08 321 300)
- retainer (06 08 289 300)
- a nut and a washer
But these pieces you can easily make your self from some pieces of sheet steel.

Have a look at the enclosed clip from the parts manual.
Attachments
GrilleParts.jpg
GrilleParts.jpg (47.1 KiB) Viewed 34551 times
User avatar
r16magnus
Site Admin
 
Posts: 55
Joined: Mon Sep 19, 2005 10:56 pm
Location: Malmö, Sweden

Postby Cor » Tue Apr 18, 2006 8:56 pm

There is one grill piece for sale here in the Netherlands, what you need.
It have no holes in it.
the r16 in Tilburg can also help you with these parts.

that is the one you need

Image

front


Image

back
Image
Cor
 
Posts: 16
Joined: Mon Apr 17, 2006 7:43 pm
Location: Wapenveld , Netherlands

Postby Neil » Mon Oct 01, 2007 9:55 pm

Hello Marco.
Have you managed to find a grill badge for your 16???
Neil.
Neil
 
Posts: 4
Joined: Sun Jul 01, 2007 8:30 pm
Location: Co. Durham, England


Return to Bodywork and painting

Who is online

Users browsing this forum: No registered users and 0 guests

cron