External Gear Change Arm
2 posts
• Page 1 of 1
External Gear Change Arm
by cedric8 » Thu Jan 19, 2006 3:07 am
I was just wondering in what position would the external gear change arm be in when it is in 4th Gear?
1973 R16TL my first car!
Bought Oct 2005
Bought Oct 2005
- cedric8
- Posts: 5
- Joined: Wed Nov 16, 2005 11:15 am
- Location: Melbourne, Australia
by r16magnus » Thu Jan 19, 2006 9:13 pm
If you mean the lever on the side it should be in the middle lower position. See sketch below.
For you aussies the lever will be on the other side of the gearbox, but it will still be the middle lower position, unless the gearbox is fundamentally different inside.
For you aussies the lever will be on the other side of the gearbox, but it will still be the middle lower position, unless the gearbox is fundamentally different inside.
- Attachments
-
- Gear lever position
- GearLever.JPG (17.62 KiB) Viewed 13136 times
-
r16magnus - Site Admin
- Posts: 55
- Joined: Mon Sep 19, 2005 10:56 pm
- Location: Malmö, Sweden
2 posts
• Page 1 of 1
Return to Gearbox, clutch and transmission
Who is online
Users browsing this forum: No registered users and 1 guest