Page 1 of 1

External Gear Change Arm

PostPosted: Thu Jan 19, 2006 3:07 am
by cedric8
I was just wondering in what position would the external gear change arm be in when it is in 4th Gear?

PostPosted: Thu Jan 19, 2006 9:13 pm
by r16magnus
If you mean the lever on the side it should be in the middle lower position. See sketch below.

For you aussies the lever will be on the other side of the gearbox, but it will still be the middle lower position, unless the gearbox is fundamentally different inside.